Solutions To Bypass Canon Printer Error Code P10

A Canon printer user may become frustrated when they cannot fix the error code P10 on their printer. The error code P10 is common, so your Canon printer may often experience it. We have given the procedure to get rid of the error code P10 in easy ways. Any Canon printer can follow these instructions and bypass the error code P10. Let’s know how to fix it.

Know Why Your Canon Printer Is Showing The Error P10

Printer experts believe that most printer error codes are caused due to either paper jam or wrong ink cartridges. If your Canon printer is displaying the error code P10, there is a paper jam inside your printer. The paper jam is a common cause of the error. You have now learned about the causes for the occurrence of the problem, so bypassing it will be an easy thing for you. Take a glance at the solutions.

Solution 1

The first method is simple. Anyone can carry out the process without prior technical knowledge. In order to fix the error, we will reset the ink cartridge counter. In most cases, resettlement the ink counter will fix the problem. Follow the directions in the same way as described below:

1. Press as well as hold the Resume and Power button at the same time.
2. Hold these buttons for at least eight to ten seconds.
3. Release the Resume button.
4. Press the Resume button about five times.
5. Finally, release the Power button.
6. When the process is done, you will see the blinking ink power turn on after a few seconds.
7. The process will fix the issue.

Solution 2

The second solution is quite similar to the one mentioned above. When you apply the second solution, your printer settings are restored. This way, you can easily get rid of the error code P10 in the blink of an eye. Follow these steps:

1. First and foremost, you have to press the Power button located on your Canon printer to turn it off.
2. After that, press and hold the Reset button on the printer after you have pressed the Power button.
3. Hold the Power button and release the Stop/Reset button.
4. Press the Power button two times and then release it.
5. Now, you have to wait for at least 30 seconds. You will see the LED light turn on.
6. Press the Power button twice in order to remove the error code from your Canon printer.

Solution 3

Resetting your Canon printer in the mentioned ways will help you get rid of the error code P10. Follow the instructions in the same manner as described below:

1. First, you have to turn off your Canon printer and then detach all its power cords from the main power supply.
2. Make sure your printer is now disconnected from all power sources.
3. Now, you have to hold the Stop/Reset button and also press the Power button at the same time.
4. When your Canon printer starts, you have to release the Stop/Reset button while holding the Power button.
5. Release all the buttons.
6. When you release all the buttons, you will see the number 0 on the Control panel.
7. If your Canon printer automatically turns off, you need to turn it on again.
8. Try to print a test page to see if the error is fixed.

NOTE: If you have not technical knowledge and are now aware of the printer hardware, you should avoid taking risks and trying out these methods. In such a case, you can contact Canon printer experts. They are highly skilled and will solve the problem for you.

Conclusion

The appearance of the error code P10 is common on Canon printers. We have described the effective methods to bypass the P10.

Source: https://livetimereviews.com/